Professional PCB design.

Q: What does your PCB design service include?

Our service covers the full design cycle: schematic capture, component selection, BOM generation, multilayer PCB layout, DFM review, design rule checking (DRC), Gerber file preparation, and manufacturing support. We work in Altium Designer and KiCad and coordinate directly with JLCPCB and PCBWay for prototype and production runs. Clients receive all source files plus fabrication-ready Gerber packages.

Q: How long does PCB layout take?

Turnaround depends on board complexity. A simple 2-layer board typically takes 3–5 business days. A complex multilayer design with high-speed signals, power integrity requirements, and dense component placement may take 10–15 business days. We discuss timelines before starting every project and offer expedited delivery when required.

Q: What PCB design tools do you use?

We work primarily in Altium Designer and KiCad — both industry-standard EDA tools. Altium Designer is used for complex, high-layer-count commercial designs. KiCad is used for open-source-friendly and cost-sensitive projects. Both tools produce standard Gerber and ODB++ output compatible with any PCB manufacturer worldwide.

Q: Do you offer schematic design as a standalone service?

Yes. Schematic capture is available as a standalone service, separate from PCB layout. We can work from a block diagram, concept description, or partial reference design. Deliverables include the schematic file (Altium or KiCad format), PDF export, and a complete BOM with LCSC and Mouser part numbers.

Q: What file formats do you deliver?

Standard deliverables include: Altium Designer (.PrjPcb) or KiCad project files, Gerber RS-274X files, NC drill files, BOM in Excel/CSV, assembly drawings in PDF, and 3D board model in STEP format. We can also deliver ODB++, IPC-2581, or Cadence formats on request.

Q: How much does PCB design service cost?

Pricing depends on board complexity, layer count, and turnaround time. A simple 2-layer schematic and layout starts from $150–$300 USD. Complex multilayer designs with high-speed or power requirements are quoted individually after a brief technical review. Contact us with your project specs for a free, no-obligation quote within 24 hours.

Q: Can you support manufacturing after the layout is complete?

Yes. Our manufacturing support service prepares your design for production at JLCPCB or PCBWay, including Gerber verification, BOM optimization for LCSC availability, impedance stack-up specification, and direct communication with the manufacturer on your behalf. We also review assembly drawings and assist with first-article inspection.

Q: Are you IPC certified?

Yes. Our lead engineer Niloy Mondal holds the IPC CID+ (Certified Interconnect Designer Advanced) certification — the internationally recognized standard for professional PCB designers. This certification validates expertise in PCB design for manufacturability, signal integrity, and industry standards compliance.

Question 1

What does your PCB design service include?

Answer

Our PCB design service includes schematic capture, component selection, multilayer PCB layout, DFM review, Gerber file generation, and manufacturing support. We work with Altium Designer and KiCad, and coordinate directly with manufacturers like JLCPCB and PCBWay. Every project is led by an IPC CID+ certified engineer and delivered with a documented design review.

Question 2

How long does PCB layout take?

Answer

A 2-layer board typically takes 5–8 business days. A 4-layer board with mixed-signal routing takes 2–3 weeks. Complex designs — 6+ layers, high-speed digital, or controlled impedance — take 3–5 weeks. Timelines are confirmed after schematic review and depend on component availability and revision rounds.

Question 3

What PCB design tools do you use?

Answer

We design in Altium Designer and KiCad. We can open and continue projects from either tool, and deliver in the format you need — Altium project files, KiCad projects, or industry-standard Gerber, IPC-356, and ODB++ outputs. BOM delivery is CSV or Excel with manufacturer part numbers.

Question 4

Do you offer schematic design as a standalone service?

Answer

Yes. Schematic capture is available as a standalone engagement. We work from your block diagram, datasheets, and design intent to produce reviewable schematics, a validated netlist, and a component BOM. You can take these deliverables to another layout engineer or continue with us for PCB layout.

Question 5

What file formats do you deliver?

Answer

Standard deliverables include RS-274X Gerbers, NC drill files, IPC-356 netlist, pick-and-place files, BOM, assembly drawings, and a 3D STEP model. On request we deliver Altium project files, KiCad project files, ODB++, or IPC-2581. Everything is packaged with a revision-controlled release note.

Question 6

How much does a PCB design service cost?

Answer

Pricing depends on layer count, component count, and signal complexity. Simple 2-layer boards start at $600. 4-layer boards with mixed-signal or power regulation typically run $1,500–$3,500. Complex high-speed or RF designs are quoted per project. Every quote is fixed-price with defined deliverables and revision rounds.

Question 7

Can you support manufacturing after the layout is complete?

Answer

Yes. Manufacturing support is included in every layout engagement. We prepare DFM-clean Gerbers, liaise with JLCPCB and PCBWay on your behalf, answer fab-side questions, and review assembly proofs before production. If an issue surfaces post-fab, we respond and release a corrected revision.

Question 8

Are you IPC certified?

Answer

Yes. Niloy Mondal — CEO of Electuni LLC and lead engineer on this service — holds IPC CID+ certification (Advanced Certified Interconnect Designer). Every layout we ship passes IPC-2221 and IPC-7351 checks, with class-2 or class-3 acceptance criteria as specified by your project.

Professional PCB design.

Multilayer.
Signal-integrity clean.

Gerbers in. Prototypes out.

Specialist engineering. Boutique speed.

Wyoming-registered. Globally delivered.

Frequently asked questions.

Tell us about your board.

Professional PCB design.

Multilayer.Signal-integrity clean.

Gerbers in. Prototypes out.

Specialist engineering. Boutique speed.

Wyoming-registered. Globally delivered.

Frequently asked questions.

Tell us about your board.

Multilayer.
Signal-integrity clean.